Make Wood Window Valance Boxes

White Wood Window Valance

Wood window valance – A valance made of wood will add character to any room and create your Windows pop with smooth tones. It is easy to do and takes just one afternoon. Add a decorative wood treatment adds depth to a room, used alone or partnered with curtains or blinds. A trip to the hardware store, you can complete a budget-friendly makeover and breathe life back into a dull window frame.

Make wood window valance boxes, Measure your window frame. Start at the far left corner and ends on the outer right corner. Add 4 inches to this number and write it. Cut a piece of 1 x 4 inch Board of Directors by means of this measurement. Cut two more pieces of 1 x 4 inch board based on the height you want for your valance. This should be an average of 8 to 18 inches. These will be part pieces four-piece frame. Lay the top table, the one you cut, on its side. Place each of the sideboards, on both sides of it in a 90-degree angle. Think of a sawhorse or bench. Drill pilot holes for the screws use wood glue to attach the boards. More secure them by adding screws. Allow glue to dry.

Measure the width of the wooden frame you built. Cut a 1/4-inch piece of plywood for this measurement. This will be your valance face piece. Use wood glue to attach the board and clamp it in place. Add a couple of nails to secure it further. Allow glue to dry. Varnish or paint piece to match the decor of your room. Allow the paint to dry. Use the L-bracket to install valance using the instructions included with the product. Fix the brackets to the wall so that the wood window valance brackets, making sure both are safe.

Comments are closed.