Make Roller Shades For Windows

Zebra Print Bedroom Ideas 2017

Roller shades for windows – First, measure length and width of the window must be fitted with roller shade. Buying a roller shade kit for the correct length and purchase fabric (decorative fabric and the fusible interfacing), there are six inches longer than the window. The extra fabric is needed to ensure that the shade when made will extend all the way to the window sill. Second, fallow the manufacturer’s instructions when attaching interfacing of decorative fabric.

Third, cut fabric roller shades for windows to the correct size for roller shade bar. The final width dimension of your fabric should be 1/8 inch narrower than the bar. The final length of the shade should be about three inches longer than the window. Fourth, place seam sealer to the sides and bottom of the curtain. Keeping the edge of the seam sealer that is flush with the edge of the fabric as possible. Seal the edges with a seam sealant, pressing firmly.

Fiveth, turn the lower side of the curtain itself during one and a half inches and the seal, forming a narrow pocket. Push the wood lath that came with roller shade kit for this pocket. Sixth, stale the un-sharp side of the curtain (top) to scroll shadow bar. Be sure to check how the roller shades for windows when you want the decorative structure to show, not interfacing. Attach the curtain rod through the short gun.

Comments are closed.