Curtain rods for corner windows – Installing curtains on the windows of the corner is difficult because there is a lot of space between each window and the corner. You can install corner curtains using a connector, however. The connector allows you to move the curtains along the rod without being blocked by the media or hardware in the corner. This gives a smooth, even look out the window. Pocket curtains work best for this project.
Installing curtain rods for corner windows, Connect the brackets by sliding the pieces of metal and plastic stand together. They fit well. Measure their lengths including curtain rod pocket curtain. Decide where you want the curtains to end as at the bottom of the window or on the ground. Screw brackets into the wall at the desired height by measuring from the ideal height curtain. Use appropriate for the wall material, like drywall screws drywall and masonry screws. If you cannot find a stud to screw in, use drywall anchors with screws. Place a central support near the corner. Ensure all brackets are aligned using a level.
Adjust the bars on the floor and slide them so they conform to the approximate required length. Slide each end of the rod into the end caps. Connect a corner at the end of each bar downtown and connect the piece together. Hook the center in the central support. Pass the curtain rod in his pocket until the curtain is carefully placed. Hook the curtain rod on the wall brackets end up tilting, engages the hook bracket and sliding down into place. It is easier to put the curtain rods for corner windows in the brackets with the help of a second person.