Hanging wall junctions can add decoration to most households. Most wall crosses come with attached brackets. If your cross or crosses do not, media buying adhesives your local hardware store and place on the crosses before hanging. If you are hanging over a cross, decides where on the wall and on what design you want to hang before. Spend the stud finder over the section of the decorative crosses for wall you want.
The indicator means of the detector will stop positions right when wooden support against the wall behind. Put a nail against wooden stand reduces any possible damage to the masonry and provide more support to the weight of the cross. No need to use the stud finder if you want to hang crosses directly against the masonry. Hold a pencil in one hand and put one of the decorative crosses for wall where you want to hang.
Position the decorative cross for wall that is right. Put a finger of your other hand as close to the center of the cross as possible. Take the cross marks the center of the wall with your pencil. Hammering a nail at the point you marked. For further support, give it some angle to the nail. Leave about mm protruding from the wall.